Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 9 results ...

Al-Ghassani, A M, Kamara, J M, Anumba, C J and Carrillo, P M (2004) An innovative approach to identifying knowledge management problems. Engineering, Construction and Architectural Management, 11(05), 349–57.

Edum-Fotwe, F T, Gibb, A G F and Benford-Miller, M (2004) Reconciling construction innovation and standardisation on major projects. Engineering, Construction and Architectural Management, 11(05), 366–72.

Egbu, C O (2004) Managing knowledge and intellectual capital for improved organizational innovations in the construction industry: an examination of critical success factors. Engineering, Construction and Architectural Management, 11(05), 301–15.

Ellis, R C T, Wood, G D and Thorpe, T (2004) Technology-based learning and the project manager. Engineering, Construction and Architectural Management, 11(05), 358–65.

Hartmann, A and Girmscheid, G (2004) The innovation potential of integrated services and its utilisation through co-operation. Engineering, Construction and Architectural Management, 11(05), 335–41.

Kumaraswamy, M, Love, P E D, Dulaimi, M and Rahman, M (2004) Integrating procurement and operational innovations for construction industry development. Engineering, Construction and Architectural Management, 11(05), 323–34.

Moselhi, O, Alkass, S and Al-Hussein, M (2004) Innovative 3D-modelling for selecting and locating mobile cranes. Engineering, Construction and Architectural Management, 11(05), 373–80.

  • Type: Journal Article
  • Keywords: Optimization Techniques; Database Management Systems; Computer Aided Design
  • ISBN/ISSN: 0969 9988
  • URL: http://titania.emeraldinsight.com/vl=3994983/cl=113/nw=1/rpsv/cw/mcb/09699988/v11n5/s9/p373
  • Abstract:
    This paper provides an overview of a recently developed system for selecting and locating mobile cranes on construction sites. The proposed system provides direct help on two fronts: cost and time savings, and improved safety arrangements. The system has a number of interesting features: a relational database designed to store the cranes' geometry-related variables and to present them using powerful graphics; a selection module supported by an algorithm designed to satisfy geometrical requirements and necessary clearances, accounting for site constraints and lift configurations; and 3D animation to facilitate the planning of crane operations. The system provides a near-optimum selection of crane lift configurations, considering available cranes. This paper focuses mainly on case examples to demonstrate and to illustrate the use and capabilities of the developed system. Two actual cases, featuring different site constraints and lift configurations, are presented. In these cases, cranes were selected and their operations planned using the developed system. The findings of the two cases are discussed and the benefits of the proposed methodology are highlighted.

Sexton, M and Barrett, P (2004) The role of technology transfer in innovation within small construction firms. Engineering, Construction and Architectural Management, 11(05), 342–8.

Steele, J and Murray, M (2004) Creating, supporting and sustaining a culture of innovation. Engineering, Construction and Architectural Management, 11(05), 316–22.